What are the parts of an energy control procedure?

What are the parts of an energy control procedure?

The energy control program has three core components: energy control procedures, employee training, and periodic inspections. Periodic inspections of the energy control procedures ensure that the procedures and the requirements of the standard are being followed.

What are the 6 steps of Lockout/Tagout?

Let’s look at each of these steps of LOTO safety more closely in the sections below.

  1. Lockout/Tagout Step 1: Preparation.
  2. Lockout/Tagout Step 2: Shut Down.
  3. Lockout/Tagout Step 3: Isolation.
  4. Lockout/Tagout Step 4: Lockout/Tagout.
  5. Lockout/Tagout Step 5: Stored Energy Check.
  6. Lockout/Tagout Step 6: Isolation Verification.

What is a hazardous energy control procedure?

Hazardous energy control is more than Lockout. It encompasses Machine Guarding, Alternative Measures (alternative guarding arrangement that prevents exposure to hazardous energy), Lockout, and other methods of ensuring worker safety from contact with hazardous energy.

What are the main points to be considered for the control of hazardous energy procedure LOTO )?

The general LOTO procedure should follow a basic 6 step process.

  • Prepare for Shutdown. Notify affected employees that maintenance will be performed under LOTO.
  • Shutdown Equipment.
  • Isolate Equipment.
  • Place Locks and Tags.
  • Release/Block Stored Energy.
  • Verify Equipment Isolation.

What is the first step in an energy control procedure?

  1. Prepare for shutdown.
  2. Shut down the machine(s) or equipment.
  3. Disconnect the energy isolating device(s).
  4. Apply the lockout or tagout device(s).
  5. Render all stored and/or residual energy safe.
  6. Verify the isolation and deenergization of the machine or equipment prior to starting work.

What is energy control plan?

The purpose of the energy control program is to ensure that, whenever the possibility of unexpected machine or equipment start-up exists or when the unexpected release of stored energy could occur and cause injury, the equipment is isolated from its energy source and rendered inoperative prior to servicing.

What do LOTO procedures outline?

LOTO will follow the specific instructions for each piece of equipment/machinery to identify, disconnect, isolate, lock out and verify the lock out of the appropriate energy sources.

What is the purpose of a LOTO procedure?

The purpose of a “Lockout/Tagout” procedure is to protect employees from machines and equipment capable of causing injury due to unexpected energization, release of stored energy or the start-up of equipment while an employee is performing maintenance or servicing equipment.

How many steps are there in LOTO process?

Six Steps Of LOTO Safety & Lockout/Tagout Procedures.

What are the steps of lockout and tagout?

The eight basic steps to a LOTO procedure are as follows:

  • Prepare for the shutdown.
  • Notify affected employees.
  • Shut down the equipment.
  • Isolate energy sources.
  • Apply LOTO devices to energy sources.
  • Release/control all stored energy.
  • Verify the lockout.
  • Maintain the lockout.

What do employers need to know about hazardous energy control procedures?

Employers are also required to train each worker to ensure that they know, understand, and are able to follow the applicable provisions of the hazardous energy control procedures: Proper lockout/tagout (LOTO) practices and procedures safeguard workers from the release of hazardous energy.

What happens if you don’t control hazardous energy?

Workers servicing or maintaining machines or equipment may be seriously injured or killed if hazardous energy is not properly controlled. Injuries resulting from the failure to control hazardous energy during maintenance activities can be serious or fatal!

What is the OSHA Energy Control Program (ECP)?

(Source: OSHA) The purpose of the Energy Control Program (ECP) is to provide written policies and rules within your safety management system that help prevent accidents like this. No worker should die or be injured due to the unexpected startup of machines and equipment, or release of stored energy.