How do I reset my WatchGuard to factory settings?
To reset a Firebox T Series device to factory-default settings:
- Power off the Firebox.
- Press and hold the Reset button on the back of the Firebox.
- While you continue to hold the Reset button, power on the Firebox.
- Continue to press the Reset button until the Attn indicator begins to flash.
- Release the Reset button.
How do I reset my WatchGuard admin password?
Change Your WatchGuard User Account Password
- Go to www.watchguard.com and log in to the WatchGuard Portal with your user account credentials.
- In Support Center, select My WatchGuard > Manage Profile.
- In the About You section, click Change Password.
- In the Your Current Password text box, type your current password.
How do I disable WatchGuard?
To disable an interface, from Policy Manager:
- Select Network > Configuration. The Network Configuration dialog box appears.
- Select the interface you want to disable. Click Configure.
- From the Interface Type drop-down list, select Disabled.
- Click OK.
How do I access WatchGuard cloud?
To enable WatchGuard Cloud, from Fireware Web UI:
- Open the device configuration in Fireware Web UI.
- Select System > WatchGuard Cloud.
- Select the Enable WatchGuard Cloud check box. If your Firebox requires a Verification Code to register with WatchGuard Cloud, the Verification Code text box appears.
What is the default password for WatchGuard?
1.1 (the most common IP for WatchGuard routers) in the address bar of your web browser to access the router’s web-based user interface. The default username for your WatchGuard router is admin. The default password is readwrite.
How do I use WatchGuard System Manager?
To open WatchGuard System Manager from the Windows desktop:
- Click Start > Programs > WatchGuard System Manager 8.2 > WatchGuard System Manager.
- Click the Connect to Device icon.
- Type the trusted IP address of the Firebox assigned to you for this course.
- Type the Firebox status passphrase.
- Click OK.
How do I reset my WatchGuard body camera?
Reset a WatchGuard AP with the Reset Button
- With the AP powered on, press and hold the reset button.
- After 5 seconds, release the reset button. If you press the reset button briefly and then release the button (less than 5 seconds), the AP reboots, but it is not reset to factory-default settings.
How do you get past WatchGuard?
Navigate to the GreatWayLine proxy site and override the Watchguard restrictions on your network. With GreatWayLine, you are able to bypass all kinds of filtering software, including Watchguard HTTP proxy filters.
How do you delete a policy on WatchGuard?
To delete a policy, from Fireware Web UI:
- Select Firewall > Firewall Policies or Firewall > Mobile VPN IPSec Policies.
- Select the policy. From the Action drop-down list, select Delete Policies. A confirmation message appears.
- Click Yes. Your configuration changes are saved automatically.
Is WatchGuard cloud free?
WatchGuard Cloud is a leading, trusted platform that eliminates the cost and complexity typically required to manage, log, and report on all security products. There’s no need for any physical or virtual infrastructure, no maintenance costs, no downtime, and no jumping back and forth between platforms.
How do I activate WatchGuard cloud?
How do I reset a watchguard AP?
Reset a WatchGuard AP. 1 Reset the AP from the Gateway Wireless Controller. 2 Press the reset button on the AP. 3 Unpair an AP. 4 Disable automatic deployment for automatically deployed APs. 5 Reset the AP from the access point’s local web UI.
How do I Reset my XTM 25 or XTM 26 to factory settings?
To reset an XTM 25 or XTM 26 to factory-default settings: Disconnect the power supply. Press and hold the Reset button on the back of the device. While you continue to hold the Reset button, reconnect the power supply or power on the device.
How do I reset a firebox M200 or M300 to factory settings?
To reset a Firebox M200 or M300 to factory-default settings: Power on the Firebox. Wait until the Arm indicator ( ) is green. Press and hold the Reset button on the front of the device. After five seconds, the Arm indicator is red.
How do I reset the XTM firebox to factory settings?
The Firebox restarts with factory-default settings. Power off the XTM device. Press and hold the down arrow button on the device front panel while you power on the device. Continue to press the down arrow button until the message Safe Mode starting appears on the LCD display.