Why is my Brother printer leaving black streaks?

Why is my Brother printer leaving black streaks?

Black, cyan, magenta, or yellow vertical lines or streaks can be caused by a dirty corona wire, a toner cartridge, or the drum unit. Follow the steps below to clean the corona wire and the drum roller.

How do I get rid of the black lines on my Brother printer?

Inside the drum unit there is a black roller. To remove any excess toner from the roller lightly dampen a cotton swab with isopropyl (rubbing) alcohol and gently DAB the toner from the black roller. You may turn this roller by moving the black/white gear on the far left side.

Why is my Brother printer making black lines?

This issue is usually resolved by cleaning and/or replacing the drum unit. Brother strongly recommends that customers use only genuine Brother drum units and/or toner cartridges.

How do you fix black streaks on a printer?

Fix the issue of printers causing black lines on paper

1. Clean the rollers. Made of soft rubber material, rollers act to move the paper inside the printer for the print to take place.
2. Replace the drum.
3. Clean or replace the fuser.
4. Clean cartridge nozzles.
5. Extract, clean and reinsert the cartridges.

How do you clean a Brother printer drum?

Turn the drum unit as shown in the illustration. Make sure that the drum unit gear is on the left side. Turn the edge of the drum unit toward you by hand while looking at surface of the suspected area. Wipe the surface of the drum gently with a dry cotton swab until the mark on the surface comes off.

Why does my printer have black smudges?

Black lines and smudges on your document may indicate that your printer is dirty. Dirt, dust, or toner accumulated on the rollers or transfer belt can cause smears and smudges on the paper as it goes through the paper. A leaky or faulty ink cartridge may be behind the black marks on your document as well.

How do you clean a Brother printer?

DCP-J572DW/MFC-J491DW

1. Press Settings.
2. Press or to select the following: Select [General Setup]. Press OK. Select [Maintenance]. Press OK. Select [Print Head Cleaning]. Press OK. Select [Black only], [Colour only], or [All]. Press OK. Select [Normal], [Strong], or [Strongest].
3. Press . The machine cleans the print head.

Why is my printer printing horizontal lines?

By far the most common problem with inkjet printers is poor print quality. Usually, these problems manifest themselves in the form of horizontal white lines running through each line of print. These white lines are caused by clogged nozzles that aren’t dispensing ink.

Is the brother hl-1440 a good printer?

Designed for personal or small offices, the award-winning HL-1440 is an affordable, personal laser printer. Delivering compatibility for either Windows or Mac users, the HL-1440 features a space-saving compact design that will fit in just about any workspace.

How do I clear the black horizontal lines/streaks from my Brother printer?

The Brother limited warranty does not apply to any problem that is caused by the use of third party drum units, toner cartridges, or toner. To clear the black horizontal lines/streaks from printed pages, follow the steps below. Open the front cover and remove the drum and toner assembly.

What does the brother limited warranty not apply to?

The Brother limited warranty does not apply to any problem that is caused by the use of third party drum units, toner cartridges, or toner. 1. Perform a manual drum cleaning: a.

What are the features of the hl-1440?

The HL-1440 also offers maximum flexibility with PCL®4 support to enable DOS printing, a generous 250-sheet paper input capacity to reduce paper refills and an innovative web-based user support system. **If free shipping is indicated above: free ground shipping on orders over $49.99 within the contiguous U.S.