What is C932?
C932 bearing bronze is hard, strong, resistant to wear, resistant to impacts, and easily machined. Additionally, c932 bronze is ductile and resistant to corrosion. Typically used in bushings, thrust washers, bearings, pumps, light duty gears, and valve components.
What is C932 bronze?
C93200 Bearing Bronze / C932 Bronze It is a general purpose bearing alloy possessing good anti-friction properties, ample strength and hardness, adequate ductility and excellent machinability.
Is 660 bronze oil impregnated?
The oil impregnated bronze bushing is ideal for applications where the loads are moderate to low but can accommodate greater velocity requirements. For our standard CB’s (Cast Bronze) bushings this alloy is C93200 SAE 660 Bearing Bronze.
What is an Oilite bushing?
From Wikipedia, the free encyclopedia. Oilite is a brand of self-lubricating bearing that is made from metal alloys with pores that channel lubricants between the bearing itself and the shaft.
How strong are bronze bushings?
Bronze sleeve bushings or bronze bearings are hard and strong, as opposed to brass bushings, which are softer and more easily deform. Thus, bronze bushings have longer lifespans than brass bushing sleeves. They resist shock and impact, wear and corrosion.
Why is brass so expensive?
Brass is worth more money due to it being made up almost entirely of copper, which is worth more than zinc. With an untrained eye or no proper tools, identifying the difference between brass and bronze can be difficult.
What is c93200 steel?
Alloy C93200, also termed C932, bearing bronze, SAE 660, SAE 660 bronze, and SAE 660 bearing bronze, is considered this family’s workhorse alloy and is widely used in many bearing applications. MORE» C93200 SPEC SHEETC93200 SIZE SCHEDULEWEIGHT CALCULATOR
What is c93200 bronze used for?
The alloy is not subject to dezincification and has reasonable corrosion resistance to seawater and brine making it suitable for pump and valve components. C93200 bronze is suitable for bearings, bushings having medium loads and speeds with adequate lubrication.
What is 932 bearing alloy used for?
C 932 Bearing Bronze is our most popular alloy. It is a general purpose bearing alloy possessing good anti-friction properties, ample strength and hardness, adequate ductility and excellent machinability. It is used as bearings, bushings, light duty gears Density 0.322 lb/in3 at 68°F 8.91 gm/cm3 @ 20°C Specific Gravity 8.910 8.91
What is the density of BHN c93200?
Density (lb/in3at 68 °F) C93200 70 0.322 Mechanical Properties Mechanical Properties according to ASTM B505/B505M-18 Tensile Strength, min Yield Strength, at 0.5% Extension Under Load, min Elongation, in 2 in. or 50 mm min Brinell Hardness (500 kg load) Remarks ksi MPa ksi MPa typical BHN 35 241 20 138 10 65 Physical Properties