How do you complete a Ford drive cycle?

How do you complete a Ford drive cycle?

Idle the vehicle in Drive for 1 minute. Drive at 25 mph and drive for 15 minutes at speeds between 15-35 mph. Within this time, stop at least 5 times, and have at least 3 periods of steady speed for 90 second durations. Drive the vehicle between 45-60mph for 8 minutes.

What is an OBD II drive cycle?

OBD drive cycle. The purpose of the OBD2 drive cycle is to let your car run on-board diagnostics. This, in turn, allows the readiness monitors to operate. And detect potential malfunctions of your car’s emission system. The correct drive cycle for your car can vary greatly depending on the car model and manufacturer.

How long is a drive cycle Ford?

Drive in stop and go traffic conditions. Include five different constant cruise speeds, ranging from 40 to 72 Km/h (25 to 45 MPH) over a 10 minute period.

How do I reset my Drive Cycle?

15 minutes of steady driving on an expressway/highway followed by 20 minutes of stop-and-go driving with at least four 30-second idle periods. Allow the vehicle to sit for at least eight hours without starting the engine. Then, start the engine and complete the above driving cycle.

How do you do a obd2 drive cycle?

In order to complete to properly achieve Readiness the vehicle has to be driven in a fashion similar to “OBD Drive Cycle”: First drive constantly with road speed between 20 to 30 MPH for approximately 4 minutes Then, drive constantly with road speed between 40 to 60 MPH for approximately 15 minutes.

How to complete a drive cycle?

follow the basic drive cycle steps faithfully. make sure to keep the speed on the freeway between 55 and 60 mph for a minimum of five miles. please use the cruise control to help you maintain speed and stay in the right lane for safety reasons.

How to perform a basic drive cycle?

step one: how to prepare your vehicle

  • step two: the cold start
  • step three: a short freeway trip
  • step four: more city driving
  • step five: have your readiness monitors checked and verified
  • What is OBDII driving cycle?

    DRIVE CYCLES > OBD II DRIVE CYCLES & TRIPS A “Drive cycle” consists of engine startup and engine shutoff. “Trip” is defined as vehicle operation (following an engine-off period) of duration and driving style so that all components and systems are monitored at least once by the diagnostic system except catalyst efficiency or

    What is the difference in the OBD1 and OBD2 engines?

    OBD1 was the revolutionary technology for 90s car. On that time, OBD1 focused on some specific analysis of an engine. The objective of OBD1 was to create a diagnostics system that would focus on the emission control system of a car. But for some reasons, it didn’t find that success. On the contrary, OBD2 is completely an improving system of OBD1.