How do I clean my HP Laserjet pickup roller?

How do I clean my HP Laserjet pickup roller?

Clean the pickup roller

1. Unplug the power cord from the product, and then remove the pickup roller.
2. Dab a lint-free cloth in isopropyl alcohol (or water), and then scrub the roller.
3. Using a dry, lint-free cloth, wipe the pickup roller to remove loosened dirt.

How do I open the tray 2?

For tray 2, remove the tray by pulling it out until it stops, lifting the front of the tray slightly, and then pulling it out….Move the length and width guides out:

1. Pinch the guide lever on each guide.
2. Slide the guides outward until they stop.
3. Release the levers.

Why does my printer roller not pull paper?

The paper might not be engaged with the feed rollers. The paper-width guide is pressed against the paper stack too tightly. The paper tray is not completely inserted into the product. The paper settings in the print driver do not match the paper loaded in the paper tray.

How do you clean a paper pickup roller?

Clean the Paper Pick-up Rollers (1) with a soft lint-free cloth moistened with water. Slowly turn the rollers so that the whole surface is cleaned. After cleaning, wipe the rollers with a dry, soft lint-free cloth to remove all moisture. Put the paper support firmly back in the machine.

Where is Tray 2 in a HP printer?

Step 2: Enable Tray 2 in the printer software Right-click your printer, and then select Printing Preferences. The Printing Preferences window opens. Click the Paper/Quality tab. From the Paper Source drop-down menu, select Tray 2.

Why does my Brother printer keep saying its out of paper?

The basic reason your Brother printer will display the “No Paper” error is if the paper tray does not have paper in it. To resolve this, you simply have to load the paper tray. And then reset it by unplugging the machine and then plugging it back in after a few seconds.