Do Lorex cameras record all the time?
This means that all of your cameras will record at all times, even when there is no activity to record. To maximize storage space, change your recording schedule to motion detection.
What does C mean on Lorex cameras?
A: Hello, The DVR can be set up for continuous recording, and an indicator symbol will be displayed next to a “C” on each of the channels to indicate that they are recording. Thanks, Lorex.
Where is the reset button on a Lorex camera?
Locate the reset button. For W281AA Series, the reset button is located at the top of the camera. Step 2. Press and hold the reset button for 10 seconds until the chime sounds to reset the camera.
How do I view my Lorex recordings?
To view playback recordings using the Lorex Secure / FLIR Secure app:
- Launch the Lorex Secure / FLIR Secure app on your smartphone or tablet.
- On the Home screen, tap your camera to stream live video.
- Tap the History icon ( ) to display all recorded events.
- Scroll up / down to browse through all events.
What does M mean on Lorex camera?
motion
The M means motion. The R means record. When there is even a tree moving with wind it will make that M come up.
What does H mean on Lorex camera?
If you see a red “H” icon on the DVR screen, then there is an issue with the Hard Drive ( HDD ). The hard drive Needs to be formatted. The DVR is not properly detecting the HDD. The HDD is malfunctioning. The DVR may need a software update so that it can successfully communicate with the HDD.
How do I adjust my Lorex camera?
To adjust image settings:
- Right-click on the channel you would like to configure and select Camera Setting. Enter the system password if prompted.
- Configure the following settings as needed: Note. The settings listed below are only shown if they are supported on the selected camera.
- Click OK to save changes. Note.