Why is my LG washing machine not draining?
Unbalanced Load. One of the most common reasons your LG washer won’t drain often results from an unbalanced load. Washing a large or heavy item can cause it to settle on one side of the washer drum. When this happens your LG washer won’t drain or spin properly and water will be left behind.
Why won’t the water drain from my washing machine?
Your washer may have a clogged drain hose or the pump may be broken. A broken lid switch or belt could also be the culprit. It may even be something as simple as the hose being jammed. Whatever the reason, the water will need to be drained from the washing machine before any work or diagnosis can be done.
Why does my washer not drain?
There are a few possibilities why your washing machine won’t drain. Your washer may have a clogged drain hose or the pump may be broken. A broken lid switch or belt could also be the culprit. It may even be something as simple as the hose being jammed.
Why is my LG front load washer not draining or spinning?
Find helpful information about your LG product Does Not Drain or Spin (Clothes Too Wet) – Front Load Washer If the clothes are too wet at the end of the cycle, it could be the result of a drain restriction or an unbalanced load. There are a few troubleshooting steps to try if the clothes inside the washer are coming out too wet.
How do you fix a whirlpool washing machine that won’t drain?
Drain the excess water into a short bucket or shallow pan. Note: The amount of water will vary according to when in the cycle the issue occurred. After all the remaining water has drained from the drain hose, twist the pump filter counterclockwise to remove from the washer.
Why is my Kenmore washer not draining my clothes?
Using the wrong detergent or too much of the right detergent can cause the unit not to drain completely or for the clothes to feel whether after the load. Using the wrong detergent or too much HE detergent causes excess of suds. The unit will try to get rid of some of the excess of suds by adding time to the cycle, up to 2 hrs .
How do I drain the water out of my Kenmore washer?
Locate the service panel on the bottom-left corner of the unit and open it. Unclip the drain hose and remove the plug from the drain hose to drain the water remaining inside the wash tub. Note: Do not pull the hose to far out, as it will kink the hose and prevent the water from draining out.