How often should you grease boat trailer bearings?

The most effective way to keep your rig rolling is vigilance. How often to grease boat trailer bearings? Keep the bearings greased and take them apart and service them at least once per year.

How often should you grease boat trailer hubs?

Standard tapered trailer wheel bearings are recommended to be re-packed with fresh bearing grease about every year or every 12,000 miles under normal use. In certain conditions this interval could be shorter, such as if you routinely tow the trailer under conditions of extreme heat or near its maximum load capacity.

When should I repack boat trailer bearings?

The axle manufacturers recommend that you repack your trailer bearings once annually or every 12,000 km. If you are over-do for trailer wheel bearing maintenance, we would be happy to help you.

Can you over grease trailer wheel bearings?

They keep grease packed into the hub. munchy wrote: More grease is never the right answer. Overgreasing can actually cause the rollers/balls to slide over the bearing surface rather than roll over them.

Can you over grease wheel bearings?

When it comes to regreasing bearings, more is not always the better option and actually can be a costly mistake. Too much grease volume (overgreasing) in a bearing cavity will cause the rotating bearing elements to begin churning the grease, pushing it out of the way, resulting in energy loss and rising temperatures.

Can you reuse trailer wheel bearings?

Keep the bearing as clean as you can. You can reuse it if it’s in good shape. Then, pull the hub all the way off; the inner bearing and seal should stay in the hub. Once the bearing is clean, it’s time to pack it with grease.

What happens if you over grease a bearing?

Too much grease volume (overgreasing) in a bearing cavity will cause the rotating bearing elements to begin churning the grease, pushing it out of the way, resulting in energy loss and rising temperatures.

How do you Grease bearings on a trailer?

Place grease into the palm of your hand.

Press a section of the widest end of the bearing into the outer edge of the grease closest to your thumb,forcing the grease into the interior of the bearing.

Repeat the process while rotating the bearing from roller to roller.

Continue this process until the entire bearing is completely covered with grease.

What kind of Grease for boat trailer bearings?

Multipurpose Grease – This type of grease has most of the properties of the other types of grease.

Calcium-based/Sodium-based Grease – This type of grease is very strong when it comes to its waterproof qualities.

Disc and Drum Wheel Bearing Grease – This type of grease is perfect if your wheels go very fast.

How to repack wheel bearings on a boat trailer?

Adjustable wrench (large)

Flat-head screwdriver

Hammer

Jack

Jack stands (2)

Needle-nose pliers

Wrench for lug nuts

What trailer bearing grease is best?

Grease Viscosity. One of the first things to concern yourself with is the grease’s viscosity.

Grease Compatibility. Another crucial aspect of this process is grease compatibility.

Water Resistance.

Capable of Dealing with High Temperatures.

Ability to Withstand High Pressures.

Biobased Grease.