How do I identify a TH350C?
If the Turbo 350C transmission is not in a vehicle, you can identify it by examining the input shaft. Turbo 350Cs have a hollow input shaft where the torque converter slips on. An “O” ring will be in a grove 1/4 of an inch back from the front of the shaft. Earlier model Turbo 350 transmissions had a solid input shaft.
Is a TH350C a good transmission?
The TH350 is an automatic shift, three-speed transmission. It is widely considered to be one of the greatest of automatic transmissions ever built. The Turbo 350 is the shortest and one of the strongest automatics that can be put into a Jeep.
What did TH350 come in?
The Turbo 350 automatic found its way into Chevrolet Camaros, Pontiac Firebirds and Chewy and GMC trucks. Although the transmission most notably matched GM vehicles with small-block V-8s, it also matched the block-block 396 V-8s, V-6s and the small Iron Duke in-line four-cylinder models.
Does a TH350 have overdrive?
Overdrive. The 700R4 has an overdrive while the TH350 does not. Overdrives allow for high-speed cruising, which saves fuel while lowering torque.
How much power can a TH350C handle?
The Stage 1 TH350 is rated up to 450 hp. Those seeking something a little stronger can check out the Stage 2 version (PN PA35102) that holds 550 hp and retails for $1,500 with a real world street price of $1,175 from most vendors. Both transmissions come with a standard one-year warranty.
How many gears does a Turbo 350 transmission have?
Turbo 350 Performance Specs This is an automatic transmission that is longitudinally mounted, making it applicable for rear-wheel drive cars. This transmission is a 3 speed, and no overdrive gear was available. The gear ratios used for this transmission were 2.52 for 1st gear, 1.52 for 2nd gear, and 1.0 for 3rd gear.
What years did GM use Turbo 350?
Cars that used the TH350 transmission include those from the late 1960s, as well as some GM all rear-wheel-drive vehicles launched in 1984. The transmission model was used in these cars until the early 1980s when the 700R4 transmission was launched.
How much HP can a stock TH350 handle?
The Stage 1 TH350 is rated up to 450 hp. Those seeking something a little stronger can check out the Stage 2 version (PN PA35102) that holds 550 hp and retails for $1,500 with a real world street price of $1,175 from most vendors.
How many gears does a 350 Turbo transmission have?
How can you tell a Turbo 350 from a Turbo 400?
The TH-350 uses a square pan, with one corner cut off. The TH-400 uses an oblong-shaped pan with one side having a “hump” in the pan and one side is curved while the other two sides are straight. The TH-400 pan also has two circular indentations on the humped side of the pan. Measure the transmission.
How can I tell the difference, TH350 or TH400?
BurningLime71307 Veteran Member.
How to tell a TH350 from a TH400?
MV4- This code identifies your turbo 350 as a “C” model,which had a locking torque converter.
What is the difference between TH350 and TH400 Trans?
The difference is in their shapes and sizes. TH350 is smaller than TH400 and there are fewer moving parts inside of it, which makes it able to be fitted in a small or light vehicle. On the other hand, TH400 is heavier and stronger than TH350.